Phoenix Energy Products™ Solar Magic for a Solar Power Generator & Solar Cell Manufacturers

SolarMagic™ power optimizers are the perfect solution to the real world problems facing home or business solar system owners. Whether you have been rejected for solar because of shading conditions such as trees, chimneys or other obstructions, or are simply failing to achieve the full potential of your investment, SolarMagic power optimizers can accelerate your return on investment by maximizing your system’s efficiency.

Just a small amount of this interference, known as “mismatch”, can cut the power output of the entire solar array in half. SolarMagic technology enables each solar panel to produce maximum energy regardless of whether other panels are under-performing due to mismatch. This advanced technology monitors and maximizes the energy harvest of each individual solar panel and reclaims up to 57% of energy lost to real world mismatch conditions. To maximize your efficiency output and your investment return, insist on having SolarMagic power optimizers installed on your solar array system.

Get the most out of your solar system - even in shaded conditions.

When it comes to solar energy, the power of the solar array is only as strong as the weakest performing panel. And in real world conditions, where shade is common from sources like trees, chimneys, power lines and even bird droppings, solar efficiency can be decreased significantly. In fact, as little as 10% shade can result in as much as 50% lost power. SolarMagic power optimizers maximize the energy potential of each individual panel so as much as 50% of the lost energy can be reclaimed.

You don’t have to be living in the desert to have an efficient solar system installed. SolarMagic power optimizers can help make solar a reality by maximizing the solar energy harvest and increasing kilowatt hours when real world conditions exist.

Going solar means going green.

Because real world conditions can interfere with solar power efficiency,, many home owners are disappointed to learn they need to cut down trees in order to get the most from their investment. With SolarMagic power optimizers, you can install a solar array with partial shade, without disturbing the natural beauty of neighboring trees.

Make sure you’re get the greatest return on your solar investment.

SolarMagic power optimizers maximize your solar panel efficiency and actually increase the kilowatt hours of energy produced. That means you’ll start saving money on your utility bills immediately - and your system will pay for itself in a shorter time period.

20-Year Warranty

All SolarMagic power optimizers come with a limited 20-year warranty, ensuring the reliability of the panel-mounted electronics matches the panels themselves.

Physical Specifications:
Body Dimension                     Weight
5.26” x 4.24” x 1.84”              2.3 pounds

Key Features

• Reclaim up to 57% of the energy lost from real world conditions
• Increase energy efficiency and reduce environmental impact
• Enjoy a faster return on your solar investment

At-a-glance real world effects on your solar array system:

• Shading dramatically reduces the energy produced from a solar array, prevents or limits new solar installations, and can force owners to cut down their trees.
• Architectural obstructions, like chimneys and dormer windows, can force installers to limit the size and efficiency of the system.
• Shade from intermittent clouds can reduce system efficiency.
• Dirt and debris on solar panels eventually happens to every system, resulting in less-than-ideal energy output.

Installing SolarMagic power optimizers can reclaim up to 57% of the energy lost to these real world conditions.

Visit www.solarmagic.com for complete details, including finding an authorized dealer in your area.

Optimize System Size and Power Production With SunMizer

How Does The SunMizer Solar Power Optimizer Work?

SunMizer collects more power from solar panels that are shaded during part of the day. When a panel is shaded, even the un-shaded panels loose power since they are wired together. SunMizer makes sure power is not lost from the un-shaded panels AND harvests power from partially shaded panels.

Why Should I Install SunMizer On My Solar Power System?

Unattractive cut-out without SunMizer	No cut-out and more power with SunMizer

YOUR SOLAR POWER SYSTEM WILL LOOK BETTER!

• Panels can be installed in locations to match your roofline.
• Avoid odd shapes and cut-outs.
• A more attractive installation with increased power harvest.

A Sunmizer Optimized System Produces More Power When Panels Experience Unavoidable Shade!

• Residential roofs are not designed with solar panels in mind, and some shade is unavoidable, even with the best system design.
• SunMizer optimized panels do not reduce the power output of the rest of the system when they are shaded.
• You get more power from the shaded panel and this is contributed to the overall system output.

Install a Larger System and Produce More Power!

System without SunMizer	More Panels = More Power With SunMizer

• Panels that are shaded during part of the day can be added to the systemand produce power with an acceptable payback.
• Panels are added at a fraction of the cost.
• Permitting, basic design and many other overhead costs are not increased by adding panels.
• Your installer is already on the roof!

How Do I Know I’m Getting The Best Solution?

SunMizer is required only on shaded panels making it the most economical product available on the market. SunMizer is produced with the highest quality and is backed by a 20 year warranty that includes replacement labor. Ask your system designer or installer for more information or visit us on the web at: www.sunmizer.com.

Improves Power Harvest

SunMizer™ is a new per-panel DC-to-DC power optimizer that performs MPP tracking at the panel substring level to increase power harvest. SunMizer achieves maximum power flow from the panel during sub-optimal module operating conditions caused by shade and soiling to recover over 50% of system level power loss.

SunMizer’s patent pending Optimum I-V for PVTM technology combines simple design with the fewest, most robust power components available. The result is best in class reliability and performance in the most effective efficiency improvement solution available for PV.

Selective Installation

"Selective installation" gives SunMizer a unique advantage over competing DC/DC power optimizers that require a unit on each panel in a string. SunMizer can be installed selectively, only on the solar panels that experience regular shade or soiling. Selective installation provides optimized power output at a lower initial cost and that means faster return on investment for the system owner.

Compatibility and Installation

SunMizer is lightweight (< 2 kg) and its compact dimensions of 6” x 4” x 1.6” (15 x 10 x 4 cm) make it easy to install directly to panel racking with standard rack system fasteners and nuts. Each unit has an integral ground lug that also accepts a ring terminal connection. SunMizer is currently compatible with Unirac Solarmount Standard and Lite, ProSolar Rooftrac, AEE SnapNrack, DPW Power-Fab, Schletter and Unistrut rack systems. SunMizer is connected in-line with PV panels using standard series wiring schemes and does not require specialized wiring or "add-on" equipment.

SunMizer is compatible with a large list of 156mm cell architecture models from most major panel manufacturers worldwide. Panels with a maximum power rating of 250W (Pmax), 48V (VOC), and 9A (ISC) can be used with SunMizer (see product specification sheet). SunMizer is compatible with most 208V and 240V residential size
inverters.

Built to Last

SunMizer is built in the USA by the solar products division using the finest long-life components and materials. SunMizer is designed to last the lifetime of any solar installation and tested to rigorous Military and Telecomm quality standards that insure the highest level of quality, performance and long life. A weatherproof NEMA 6(IP67) enclosure ensures that the unit will not be affected by dust intrusion, water or ice. Each unit is covered by a 20 year warranty with replacement labor provision. SunMizer is certified to the UL 1741 safety standard and the European CE and GS standards. All SunMizer components are RoHS compliant (lead, mercury and cadmium free).